Film converters and importers ask the same question before every order: which white masterbatch gives strong opacity without gels or die lines? The answer depends on your film process, thickness, resin and destination market. This guide explains how to choose the best white masterbatch for PE film, whether you run blown film or cast film.
It is written for importers, distributors, film factories and purchasing teams. You will learn how to compare TiO2 loading, carrier resin and dosage. You will also see common film problems, the documents to request and the checks to run on a supplier before you send an inquiry.
PE white masterbatch for film uses a PE carrier, so it mixes well with LDPE, LLDPE and HDPE. Compared with dry TiO2 powder, a masterbatch is cleaner to handle, easier to dose and spreads the pigment more evenly.
The wrong grade creates costs that do not appear on the price sheet. Poor dispersion causes gels, streaks and die lines. Low opacity forces you to raise the dosage or run thicker film. A mismatched carrier can slow the line.
The right grade gives stable whiteness, clean print surfaces and predictable dosage. For buyers, that means fewer rejected rolls and steadier repeat orders. When you compare quotes, look at total film cost and not only the white masterbatch price per kilogram.
• Opacity: how well the film hides the product or inner layers. A high opacity PE white masterbatch helps thin film look solid white.
• Whiteness: the brightness of the film. It depends on TiO2 quality and loading.
• Dispersion: how evenly TiO2 spreads in the melt. Good dispersion prevents gels and pinholes, especially in thin film.
• Melt flow match: the carrier should run smoothly with your base resin.
• Heat stability: the pellet should resist yellowing at your processing temperature.
Ask the supplier for test data, then confirm the results in a short trial on your own line.
Debao offers plastic white masterbatch from 20% to 75% TiO2. For PE film, these ranges are common:
• 30%–40%: low-cost films and sheets with modest opacity needs.
• 50%–60%: general-purpose film, shopping bags and courier bags.
• 65%–75%: thin film, food packaging and high-opacity layers.
Some suppliers advertise 80% grades. Debao’s current PE range tops out at 75%. If your project needs another loading, ask about custom masterbatch production.
Use this formula to estimate TiO2 in the finished film: TiO2 in film (%) = masterbatch loading (%) × dosage (%). A 70% grade at 4% dosage gives 2.8% TiO2. A 50% grade at 4% gives only 2.0%. So compare the price per kilogram of TiO2, not only the price per kilogram of masterbatch.
Surface treatment of the pigment also affects dispersion. Ask your supplier which TiO2 grade it uses and how it checks incoming material.
• LDPE: common for bags, liners and wrap.
• LLDPE: common for thin, strong film where puncture resistance matters.
• HDPE: common for shopping bags and thin-gauge liners.
Melt flow matters as much as resin type. A carrier with melt flow close to your base resin mixes more evenly. Tell your supplier your resin grade, film thickness and line type. Debao also supplies PP white masterbatch and PS, PET and ABS grades, so buyers with mixed production can work with one white masterbatch supplier in China.
• Medium to high loading (60%–70%) for low dosage and good opacity.
• Good dispersion to avoid gels in the bubble.
• A stable melt flow that keeps the bubble steady.
Debao’s PE White Masterbatch range lists R1501 (70% TiO2) for general blown films and C16051 (60% TiO2) for cost-effective courier bags.
W1501 (70% TiO2) and W1501-A (75% TiO2) suit film that needs strong opacity at low thickness. Run a trial on your cast line before you place a bulk order.
Prices depend on TiO2 loading, order volume and specification, so request a quotation with your target film details.
• Start from the supplier’s recommended dosage.
• Run a trial and measure opacity and whiteness.
• Adjust in small steps, such as 0.5%.
• Record film thickness, line speed and melt temperature for repeat orders.
A reliable supplier does more than quote a low price. When you compare a china masterbatch manufacturer or any wholesale masterbatch supplier, use this checklist:
• Product focus: a factory that makes only white masterbatch tends to know TiO2 and dispersion well. Debao works only on white masterbatch.
• Quality control: ask how the supplier tests each batch. Debao states that it runs more than 20 test steps on its white masterbatch.
• Documents: request the TDS, SDS, batch COA and compliance statements for the exact grade.
• Customization: TiO2 loading, carrier resin, melt flow and shade should be adjustable.
• Technical support: the team should help with dosage and trial problems.
• Export support: check packing, shipping documents and delivery experience for your region. Debao exports to more than 25 countries.
Consistent, high-quality plastic masterbatch comes from controlled raw materials and repeatable testing. Among PE masterbatch manufacturers, the right partner is the one that can document what it ships.
• FDA (United States): suppliers show compliance with FDA rules. They do not hold “approval” for a pellet itself.
• Regulation (EU) No 10/2011: covers plastic food-contact materials. EU buyers usually ask for a supporting declaration of compliance.
• REACH and RoHS: ask for a statement for each grade.
• Migration testing: labs test the finished film, so the film maker usually carries final responsibility.
It depends on film thickness and opacity needs. Thin, high-opacity and food packaging film often uses 65%–75%. Cost-driven bags often use 50%–60%. A short trial gives the clearest answer.
How much white masterbatch should I add to PE film?
Dosage commonly ranges from 2% to 8%. Multiply loading by dosage to estimate TiO2 in the film, then confirm with a trial run.
Is the grade different for blown film and cast film?
The base product is the same, but cast film is thinner and faster. It needs stricter dispersion control and often a higher loading.
Can I order a custom white masterbatch?
Yes. Debao can adjust TiO2 loading, carrier resin and other specifications to match your film line. Share your process and target, and the team will advise.
Which documents should I request before ordering?
Ask for the TDS, SDS, batch COA and compliance statements for the exact grade. Add REACH and RoHS statements, plus heavy metal or migration test reports where available.
Does Debao supply overseas buyers?
Yes. Debao states that it exports to more than 25 countries. Tell us your destination market so we can confirm documents and shipping details.
Debao focuses on white masterbatch and supports overseas buyers with product details, quotations, samples, customization and technical support. Contact Us with your film type, thickness, opacity target and destination market, and our team will suggest a suitable grade. You can also email fred@jsdebao.com or message us on WhatsApp at +86 18706172927.
It is written for importers, distributors, film factories and purchasing teams. You will learn how to compare TiO2 loading, carrier resin and dosage. You will also see common film problems, the documents to request and the checks to run on a supplier before you send an inquiry.
What Is White Masterbatch for PE Film and How Does It Work?
White masterbatch is a concentrated pellet made from titanium dioxide (TiO2), a carrier resin and processing additives. Film makers blend it with virgin PE at a set ratio, called the let-down ratio. The TiO2 scatters light, so the film turns white and opaque.PE white masterbatch for film uses a PE carrier, so it mixes well with LDPE, LLDPE and HDPE. Compared with dry TiO2 powder, a masterbatch is cleaner to handle, easier to dose and spreads the pigment more evenly.
Why Choosing the Best White Masterbatch for PE Film Matters
The wrong grade creates costs that do not appear on the price sheet. Poor dispersion causes gels, streaks and die lines. Low opacity forces you to raise the dosage or run thicker film. A mismatched carrier can slow the line.
The right grade gives stable whiteness, clean print surfaces and predictable dosage. For buyers, that means fewer rejected rolls and steadier repeat orders. When you compare quotes, look at total film cost and not only the white masterbatch price per kilogram.
Key Properties of the Best White Masterbatch for PE Film (Opacity, Whiteness, Dispersion)
Check these properties when you compare grades:• Opacity: how well the film hides the product or inner layers. A high opacity PE white masterbatch helps thin film look solid white.
• Whiteness: the brightness of the film. It depends on TiO2 quality and loading.
• Dispersion: how evenly TiO2 spreads in the melt. Good dispersion prevents gels and pinholes, especially in thin film.
• Melt flow match: the carrier should run smoothly with your base resin.
• Heat stability: the pellet should resist yellowing at your processing temperature.
Ask the supplier for test data, then confirm the results in a short trial on your own line.
TiO2 Content Explained: 50%, 60%, 70% or 80% White Masterbatch?
TiO2 content is the percentage of titanium dioxide in the pellet. A higher loading gives more whiteness per gram, so you add less masterbatch. A lower loading costs less per kilogram but needs a higher dosage.Debao offers plastic white masterbatch from 20% to 75% TiO2. For PE film, these ranges are common:
• 30%–40%: low-cost films and sheets with modest opacity needs.
• 50%–60%: general-purpose film, shopping bags and courier bags.
• 65%–75%: thin film, food packaging and high-opacity layers.
Some suppliers advertise 80% grades. Debao’s current PE range tops out at 75%. If your project needs another loading, ask about custom masterbatch production.
Use this formula to estimate TiO2 in the finished film: TiO2 in film (%) = masterbatch loading (%) × dosage (%). A 70% grade at 4% dosage gives 2.8% TiO2. A 50% grade at 4% gives only 2.0%. So compare the price per kilogram of TiO2, not only the price per kilogram of masterbatch.
Rutile vs Anatase TiO2: Which Is Better for PE Film?
Rutile is the usual choice for plastics. It has a higher refractive index, so it delivers stronger opacity and better durability. Anatase scatters less light and ages faster in most plastic uses. Debao’s PE white masterbatch uses premium rutile TiO2.Surface treatment of the pigment also affects dispersion. Ask your supplier which TiO2 grade it uses and how it checks incoming material.
Carrier Resin Matters: LDPE, LLDPE and HDPE White Masterbatch
The carrier resin holds the pigment and carries it into the melt. It should match your base resin and process.• LDPE: common for bags, liners and wrap.
• LLDPE: common for thin, strong film where puncture resistance matters.
• HDPE: common for shopping bags and thin-gauge liners.
Melt flow matters as much as resin type. A carrier with melt flow close to your base resin mixes more evenly. Tell your supplier your resin grade, film thickness and line type. Debao also supplies PP white masterbatch and PS, PET and ABS grades, so buyers with mixed production can work with one white masterbatch supplier in China.
Best White Masterbatch for Blown PE Film
Blown film is the main route for bags, liners, wrap and agricultural film. For this process, look for:• Medium to high loading (60%–70%) for low dosage and good opacity.
• Good dispersion to avoid gels in the bubble.
• A stable melt flow that keeps the bubble steady.
Debao’s PE White Masterbatch range lists R1501 (70% TiO2) for general blown films and C16051 (60% TiO2) for cost-effective courier bags.
Best White Masterbatch for Cast PE Film
Cast film is thinner and runs faster. Any TiO2 cluster shows up as a gel or streak, so dispersion matters even more. A higher loading lets you use a lower dosage, which can help keep the film’s mechanical properties closer to the base resin. Use melt filtration where your line allows it.W1501 (70% TiO2) and W1501-A (75% TiO2) suit film that needs strong opacity at low thickness. Run a trial on your cast line before you place a bulk order.
How to Choose White Masterbatch for Different PE Film Applications (Packaging, Agriculture, Shopping Bags, Stretch Film)
Packaging Film
Packaging buyers need PE masterbatch for packaging that comes with grade-specific documents. Thin film also benefits from higher loading. For food-contact projects, read our guide to Food-Grade White Masterbatch for PE Film & Packaging.Agricultural Film
Outdoor film faces sun and heat. Tell your supplier the expected service life so the team can recommend extra weather or UV protection if needed.Shopping Bags and Courier Bags
These products are cost-driven. A 50%–60% grade often gives enough opacity at a reasonable cost. Debao lists C16051 for courier bags.Stretch Film
Stretch film needs low gel content and a carrier that works with LLDPE. Confirm compatibility and run a trial before bulk supply.White Masterbatch Comparison Table: Grades, TiO2 %, Carrier Resin and Best Use
The table below summarizes Debao’s PE white masterbatch grades. Use it as a starting point and confirm the latest datasheet before ordering.| Grade | TiO2 Content | Carrier Resin | Best Use |
| W1501-A | 75% | PE | Highly concentrated for general purpose film |
| W1501 | 70% | PE | High-quality white for food packaging, consumer goods, industrial packaging, agriculture |
| R1501 | 70% | PE | Standard quality for general blown films |
| W1502 | 65% | PE | General purpose applications |
| C16051 | 60% | PE | Cost-effective with good opacity, especially courier bags |
| W1505 | 50% | PE | General purpose applications |
| W1506 | 40% | PE | Cost-effective for films and sheets |
| W1508 | 30% | PE | Cost-effective for films and sheets |
Prices depend on TiO2 loading, order volume and specification, so request a quotation with your target film details.
Recommended Dosage (Let-Down Ratio) of White Masterbatch in PE Film
For PE film, dosage commonly ranges from 2% to 8%. Thicker film, higher opacity targets and lower-loading grades push the number up. Treat this range as a starting point and follow these steps:• Start from the supplier’s recommended dosage.
• Run a trial and measure opacity and whiteness.
• Adjust in small steps, such as 0.5%.
• Record film thickness, line speed and melt temperature for repeat orders.
Common Problems with White Masterbatch in PE Film and How to Fix Them (Gels, Die Lines, Poor Opacity)
Gels and Specks
Cause: TiO2 clusters, contamination or a carrier that does not match the base resin. Fix: check melt flow compatibility, switch to a better-dispersed grade and use melt filtration.Die Lines
Cause: pigment build-up at the die lip or poor dispersion. Fix: use a higher loading to cut the dosage, choose a well-dispersed grade and clean the die on a schedule.Poor Opacity
Cause: dosage too low, loading too low or film too thin. Fix: raise the dosage, move to a higher-loading grade or check film thickness. If the film also yellows, lower the melt temperature and shorten residence time.How to Evaluate a White Masterbatch Supplier: Quality Checks and Test Reports
A reliable supplier does more than quote a low price. When you compare a china masterbatch manufacturer or any wholesale masterbatch supplier, use this checklist:
• Product focus: a factory that makes only white masterbatch tends to know TiO2 and dispersion well. Debao works only on white masterbatch.
• Quality control: ask how the supplier tests each batch. Debao states that it runs more than 20 test steps on its white masterbatch.
• Documents: request the TDS, SDS, batch COA and compliance statements for the exact grade.
• Customization: TiO2 loading, carrier resin, melt flow and shade should be adjustable.
• Technical support: the team should help with dosage and trial problems.
• Export support: check packing, shipping documents and delivery experience for your region. Debao exports to more than 25 countries.
Consistent, high-quality plastic masterbatch comes from controlled raw materials and repeatable testing. Among PE masterbatch manufacturers, the right partner is the one that can document what it ships.
Food-Contact and Regulatory Compliance for White PE Film Masterbatch
Compliance depends on the grade and on your destination market. Debao’s PE white masterbatch page lists REACH, FDA and RoHS compliance, and its Regulatory page states that its products meet FDA, EU food-contact and REACH standards. Even so, always request documents for the exact grade you plan to buy. Keep these points in mind:• FDA (United States): suppliers show compliance with FDA rules. They do not hold “approval” for a pellet itself.
• Regulation (EU) No 10/2011: covers plastic food-contact materials. EU buyers usually ask for a supporting declaration of compliance.
• REACH and RoHS: ask for a statement for each grade.
• Migration testing: labs test the finished film, so the film maker usually carries final responsibility.
FAQs About the Best White Masterbatch for PE Film
What TiO2 content is best for PE film?It depends on film thickness and opacity needs. Thin, high-opacity and food packaging film often uses 65%–75%. Cost-driven bags often use 50%–60%. A short trial gives the clearest answer.
How much white masterbatch should I add to PE film?
Dosage commonly ranges from 2% to 8%. Multiply loading by dosage to estimate TiO2 in the film, then confirm with a trial run.
Is the grade different for blown film and cast film?
The base product is the same, but cast film is thinner and faster. It needs stricter dispersion control and often a higher loading.
Can I order a custom white masterbatch?
Yes. Debao can adjust TiO2 loading, carrier resin and other specifications to match your film line. Share your process and target, and the team will advise.
Which documents should I request before ordering?
Ask for the TDS, SDS, batch COA and compliance statements for the exact grade. Add REACH and RoHS statements, plus heavy metal or migration test reports where available.
Does Debao supply overseas buyers?
Yes. Debao states that it exports to more than 25 countries. Tell us your destination market so we can confirm documents and shipping details.
Conclusion
Choosing the best white masterbatch for PE film comes down to five checks: the right TiO2 loading, a matching carrier, a sensible dosage, strong dispersion and documents for the exact grade. Test before you scale up, and work with a supplier that can support your line.Debao focuses on white masterbatch and supports overseas buyers with product details, quotations, samples, customization and technical support. Contact Us with your film type, thickness, opacity target and destination market, and our team will suggest a suitable grade. You can also email fred@jsdebao.com or message us on WhatsApp at +86 18706172927.





